A number of times you want to know the kind of finish that has been used on your furniture. To find out you will have to do a solvent test. Dip cotton in some nail polish remover or acetone and rub over an area that is not easily visible. If the finish softens then the finish is nitrocellulose lacquer, which is the most popular finish in the furniture industry. If the finish softens with alcohol then the finish is shellac. If it does not soften with either acetone or alcohol then the finish is varnish, polyurethane, catalyzed lacquer etc. that cannot be dissolved by its original solvent.



Metal bed frames are squeaking then just apply oil to the rivets and this will stop it from squeaking. If a bed made out of wood squeaks, it means it is getting loose and needs re-gluing.

Drawer wood moves against wood and certain parts need to be lubricated. If drawers stick rub some paste wax on the drawer and the wood that it rides on. If this does not work then the drawer needs some repair or is very worn out.

Be careful while buying wooden furniture. Furniture made of particleboard and medium density fiberboard is also called "solid wood". But furniture made out of these is not worth buying, as it is harder to repair and heavier than real wood. Buy furniture with signs that explicitly say solid oak wood or cherry wood or ash wood. These are safer to buy.

You are applying finish on your furniture then remember to account for humidity. High levels of humidity in the air will prevent the finish from drying and it will turn white or have a dull finish. If a professional is finishing your furniture then allow the piece to dry completely, for a few days before using it.

Glass tabletops actually protect the wooden tables. Do not allow moisture get trapped between the glass and the wood. Raise the glass tabletop with rubber bumpers, this will allow airspace and let the wood breath.

Placing any kind of potpourri directly on the furniture will damage the finish even though it is kept in cloth or plastic bag.

Before using wooden screws rub a little candle or bee's wax or soap on the screw threads and it will move more smoothly.